Gorilla waterproof coat & seal transparent 473ml

Gorilla Waterproof Rubber Seal – Clear Adhesive 473ml

Gorilla Waterproof Coat & Seal is a liquid rubber coating that can be brushed, rolled, or poured onto almost any leaky surface to create a 100% airtight and waterproof seal. It’s easy to use and requires no specialized skills or tools.

Full cure in 24-48 hours.

Gorilla Waterproof Coat & Seal is ideal for:

– Roofs and Gutters
– Sheds
– Skylights
– PVC Pipes
– Windows

– And More!

Stops and Prevents Leaks

This liquid rubber is an easy way to stop and prevent leaks in your home. Even if you’re not an experienced DIYer, you can seal a leak yourself.

Self-Leveling

Gorilla Waterproof Coat & Seal requires no specialized technique or skills. Simply pour or “paint” it on, and the coating will level and dry completely, fully curing in 24-48 hours (depending on the sealant and weather conditions).

Weatherproof

Coat & Seal is waterproof and weatherproof. This means it can withstand extreme temperatures and cold, ensuring a durable, crack-free repair.

Application:
PREPARATION

Ensure the surface is clean and free of dust, grease, and oil.

STIR

Stir the contents for 30 seconds until thoroughly mixed.

USE
Apply to the surface with a brush, roller, trowel, or simply by pouring.

Apply at temperatures between 10°C and 48°C. Full cure in 24-48 hours.

**Do not apply to gaps larger than 6 mm. Ensure the surface is completely covered. Immediately wipe off any unwanted material with a dry cloth or paper towel.

The adhesive will cure to a soft, rubbery, glossy finish.

Note:

Multiple coats may be applied to ensure all cracks and holes are filled. Test the finished project under a light stream of water to ensure all cracks are filled. If the test fails, apply additional coats after drying. Allow to cure between coats and before contact with water. Surfaces must be non-porous to achieve a waterproof seal.

Manufacturer: Gorilla Glue, Inc. – Cincinnati, Ohio

Made in the USA