Your cart
It looks like you haven't made your choice yet.
Go to the store
JB Weld KwikWood Wood Putty 57g
Be the first one to review this product15,84€
Out of stock
Product unavailable. Contact us to check availability or get notified!
Prefer a person?
Message Daniel to order:
Whatsapp: +48 514 052 503
E-mail: sklep@lysyorzel.pl
Description
Epoxy glue for wood repair
KwikWood is a hand-mix epoxy putty formulated for wood repair and restoration. Once mixed, it hardens to the same density as the wood and becomes an integral part of the repaired object. Suitable for exterior or interior use, it is solvent-free and will not rot, shrink, crack, or peel.
KwikWood dries in 15-25 minutes . After 60 minutes, it can be machined, drilled, threaded, sanded, sawed, and painted .
- Can be used as a filler for large cracks or holes
- Also used as an adhesive for joining two pieces of wood (fixing required)
- Dries to a harder material than wood
- Does not shrink or rot over time
- Can be painted and stained
- Once dry, it can be sanded, drilled or tapped.
- Unlike wood, it will not be attacked by termites or pests.
- Dries to a light brown color
It is very important to follow the application instructions when using this product, please read the recommended steps before use.
KwikWood is perfect for:
- Dry rot
- Window and door frames
- Screw holes
- Insect damage
- Furniture and sculptures
- Grooves and cracks
- PVC finishing boards
May be:
- Molded
- Kneaded into shape
- Threaded
- Grinded
- Drilled
- Painted!
KwikWood won’t shrink or rot over time, so you can count on a strong and durable repair.
APPLICATION
Step 1: Prepare the surface
Cut a large piece of epoxy resin from the tube. Be sure to cover the entire repair area with a thick and even layer.
Step 2: Mix
Thoroughly knead the putty between your hands and fingers until it turns a uniform light brown—about 30-60 seconds. This step is crucial to ensure the epoxy components are evenly mixed and activated.
Step 3: Apply
Apply a thick, even layer of putty, enough to cover the entire damaged area and the surrounding area. Press firmly to ensure the putty adheres to the surface in all areas, leaving no gaps or holes.
Step 4: Dry
The putty cures fully 1 hour after application, however we recommend waiting 24 hours before exposing the repaired surface to water or pressure.
Manufacturer: JB Weld – Sulfur Springs, Texas
Made in the USA
Product specification
| Strength | 2450 PSI |
|---|---|
| Set time | 15 - 25 minut |
| Cure time | 1 godzina |
| Cure color | Beżowy (Możliwość malowania i barwienia) |
| SKU code | 8258 |
| EAN code | |
| Manufacturer | J-B Weld |
Reviews (0)
Be the first one to review this product
You must be logged in to post a review.